Oil in can.
~§~
Old felt tip pen.
~§~
Oil pen. Good for controlled oiling without dripping (hinges, clocks, etc.).
•••
Oil in can.
~§~
Old felt tip pen.
~§~
Oil pen. Good for controlled oiling without dripping (hinges, clocks, etc.).
•••
Original gear lever assembly
~§~
~§~
~§~
~§~
Pin and spherical part (some chrome alloy) may have been brazed
~§~
Welded & machined assembly adds an extra 20mm to the selector end
~§~
~§~
~§~
Gearbox housing spacer cast and machined from aluminium
~§~
~§~
Completed assembly reduces top-end throws from 6″, to 4″ ~ 33% reduction.
~§~
knoba – ball turning fixture for lathe
•••
Adapter is mild steel.
~§~
Chuck was off an old model makers drill (3/8 unf).
~§~
Machine taper allows adapter to fit onto both re-machined gauges.
~§~
Tohnichi gauge left, Waters gauge right.
~§~
Deterco.com – Waters Torque Watch
•••
Made out of scraps around the workshop: 4mm & 6mm plywood, 10x26mm pine, 4mm rosewood dowels, stainless steel sheet, mild steel pins, nylon 66, brass rivets with a linseed oil finish…
~§~
A little flourish around the hinge area…
~§~
Nylon feed rollers.
~§~
Sprung cams trap the emery, but allow it to be pulled out easily
~§~
Lids are hinged for refills…
~§~
Now fitted with the added possibility of a tea shelf…
~§~
knoba – Emery Roll Dispenser – 2015.dxf (link below)
~§~
knoba – Emery Roll Dispenser – 2015.dxf
Homemadetools.net – Online tool maker community
•••
Single wheel knurler; mild steel, high tensile steel, stainless steel & brass.
~§~
Filed, drilled, reamed & bevelled. Captivated dowels & countersunk bolts.
~§~
Lever stops the sacrificial nut & bolt from elongating the body…
~§~
~§~
Used on a tool post, near the tailstock off a live centre, profiles, formers & patterns can be made from silver steel…
~§~
knoba – Knurling Copier & Profiler – 2015.dxf (link below)
~§~
knoba – Knurling Copier & Profiler – 2015.dxf
West Yorkshire Steel – Silver steel.pdf
Ebay.co.uk – Stainless Steel Dowel 3x12mm
•••
Sprung loaded silver steel single point captivated by m4 grub screw
~§~
Arbor machined to fit one of my 5c lathe collets
~§~
~§~
knoba – Toothed drive centre – 2015.dxf (link below)
~§~
knoba – Toothed drive centre – 2015.dxf
•••
I really need to sort out this concrete path…
~§~
Sliced up paving slabs will provide form-work. Can be left in situ as a feature.
~§~
Diamond disc cutter…
~§~
Impromptu slab sizing jig fixed to trestle…
~§~
Stone bevelling jig…
~§~
Cut to size, bevelled edges and stuck with industrial adhesive.
~§~
Right side up (cut face), looks good…
~§~
Form-work laid to pegged-out levels. Can pour concrete as individual panels, as and when.
~§~
Panel centre features; molds made out of cement, water and a little PVA glue.
~§~
Pattern mold made from coke bottle and a pen top lid…
~§~
Using crayon as a release agent…
~§~
Cement mix poured on top of mold to produce an inverted pattern…
~§~
Wood block stuck to back of inverted pattern as a handle…
~§~
Mix for medallions: 1 sand, 1 cement, 1 iron filings…
~§~
Inverted pattern into tube, mixture packed in & pressed out…
~§~
Wet medallions…
~§~
Dry medallions (to be used as a centre feature in each panel)…
~§~
Alternate panels poured (so I can work on each one without stepping on a previous wet panel)…
~§~
Medallions were pressed in after tamping & striking each panel.
~§~
Mix for panels: 1,3,3 (cement, sharp sand, ballast).
~§~
Bostik.co.uk – Gripfill adhesive
Source4me – Concrete mix calculator
•••
Disc can be drilled to suit other similar applications as need arises.
~§~
•••
~§~
~§~
~§~
~§~
~§~
~§~
~§~
~§~
~§~
knoba – Screwdriver Rack – 2014.dxf (link below)
~§~
Perspex – Fluorescent Cast Acrylic Neptune Blue 7T97
knoba – Screwdriver Rack – 2014.dxf
•••
Lathe wood turning fixture & polished 304 stainless steel rests
~§~
~§~
~§~
~§~
Extended rest.
~§~
~§~
•••