Wood bending steam setup

Simple, inexpensive, permanent & unobtrusive…
knoba - wood bending steam setup

~§~

3m x 160mm o/d aluminium van tube (3″ fall over length to let water out)…
knoba - wood bending steam setup

~§~

Bosch PTL1; 2kw, 2.4l capacity = 45 mins, 3m hose.
knoba - wood bending steam setup

~§~

Hose fitting is 14mm circumference plus the bayonet (push fit only as added saftey).
knoba - wood bending steam setup

~§~

Machined brass fitting from propane bottle valve (3/4 bspt, 14mm bore).
knoba - wood bending steam setup

~§~

End cap is left loose (hinged at top) to allow steam egress.
knoba - wood bending steam setup

~§~

Brackets were made made from old aluminium cafe chairs left on the street
knoba - wood bending steam setup

~§~

Freegle – Wallpaper steamer

Ebay – Van Pipe

•••

Advertisements