Rivet sets & snaps

No go with any tool suppliers so got this chisel set off ebay…
knoba - Rivet snaps & sets

~§~

Annealed.
knoba - Rivet snaps & sets

~§~

Figuring out what I want and what can get away with. A set of Starrett radius gauges helped me figure out the radii for the tool grinding.
knoba - Rivet snaps & sets

~§~

Machined, stamped, hardened & tempered (to suit: 3/32″, 1/8″ & 5/32″ diameter shank rivets)
knoba - Rivet snaps & sets

~§~

Tried the “heat and hammer a ball bearing in” method, it just made a mess.
knoba - Rivet snaps & sets

~§~

Anvil end. 2 snaps (one used as a hold-up) & a set for each size.
knoba - Rivet snaps & sets

~§~

Jay Cee – Solid Round Head Rivet Specifications

Rivetking.com – Solid Rivet Design Considerations.pdf

•••

Advertisements

Emery roll dispenser

Made out of scraps around the workshop: 4mm & 6mm plywood, 10x26mm pine, 4mm rosewood dowels, stainless steel sheet, mild steel pins, nylon 66, brass rivets with a linseed oil finish…
knoba - Emery roll dispenser

~§~

A little flourish around the hinge area…
knoba - Emery roll dispenser

~§~

Nylon feed rollers.
knoba - Emery roll dispenser

~§~

Sprung cams trap the emery, but allow it to be pulled out easily
knoba - Emery roll dispenser

~§~

Lids are hinged for refills…
knoba - Emery roll dispenser

~§~

Now fitted with the added possibility of a tea shelf…
knoba - Emery roll dispenser

~§~

knoba – Emery Roll Dispenser – 2015.dxf (link below)
knoba - Emery roll dispenser

~§~

knoba – Emery Roll Dispenser – 2015.dxf

knoba – Folding bar

WorkShopShed – Home site

Homemadetools.net – Online tool maker community

•••

Axe sheath

Leather axe sheath with riveted seam & popper fastening…
knoba - axe sheath

~§~

knoba - axe sheath

~§~

knoba - axe sheath

~§~

Estwing – Carpenter hatchet (discontinued?)

Ebay – Jean studs

Ebay – 15mm snap fastener

•••