Workshop smoke alarm

Switched smoke alarm for workshop. LED off indicates smoke alarm is active.

~§~

LED flashing on indicates smoke alarm is deactivated.

~§~

It can get a bit smoky in my workshop!

~§~

Wiring.

~§~

~§~

~§~

Schematic file below.

~§~

Materials:
1 x Switch: 1A, spdt (single pole, double throw)
1 x Flashing blue LED: 10mm, 15mA, 3.2v
1 x 10mm LED holder/bezel
1 x Resistor: 470ohms, 1/4W
Wire: 7/0.2mm 
Small heatshrink tubing

~§~

knoba – Workshop Smoke Alarm Schematic – 2018.fzz

•••