Via punches

Machined punches for brass through hole rivets
knoba - via punches

~§~

Copper tracks had lifted, component had disintegrated, good repair, will use again!
knoba - via punches

~§~

Refined the punches with; a taper, size i.d. & thumb nook
knoba - via punches

~§~

knoba - via punches

~§~

Materials (per unit):
1 x 75x6 mm (3"x1/4") circular solid section stainless steel


•••

Emery roll dispenser

Made out of scraps around the workshop: 4mm & 6mm plywood, 10x26mm pine, 4mm rosewood dowels, stainless steel sheet, mild steel pins, nylon 66, brass rivets with a linseed oil finish…
knoba - Emery roll dispenser

~§~

A little flourish around the hinge area…
knoba - Emery roll dispenser

~§~

Nylon feed rollers.
knoba - Emery roll dispenser

~§~

Sprung cams trap the emery, but allow it to be pulled out easily
knoba - Emery roll dispenser

~§~

Lids are hinged for refills…
knoba - Emery roll dispenser

~§~

Now fitted with the added possibility of a tea shelf…
knoba - Emery roll dispenser

~§~

knoba – Emery Roll Dispenser – 2015.dxf (link below)
knoba - Emery roll dispenser

~§~

knoba – Emery Roll Dispenser – 2015.dxf

knoba – Folding bar

WorkShopShed – Home site

Homemadetools.net – Online tool maker community

•••