Tool throat LED

CAD stick-on templates, polycarbonate sheet & LED module
knoba - tool throat LED

~§~

Module detail, 240v ac in, 20w out
knoba - tool throat LED

~§~

All 8 holes drilled, cut out centre with fret saw/coping saw
knoba - tool throat LED

~§~

Machined with laminate trimmer (small router)
knoba - tool throat LED

~§~

All cleaned up. Lens (top), body (left) & module (right).
knoba - tool throat LED

~§~

Very slim profile, very bright.
knoba - tool throat LED

~§~

knoba - tool throat LED

~§~

What’s in the CAD file…
knoba - tool throat LED

~§~

Materials:
1 x 75x50x10 mm (3"x2"x3/8") polycarbonate sheet
1 x 75x50x3 mm (3"x2"x1/8") polycarbonate sheet
4 x M3x20 mm (1/8"x3/4") pan head machine screws
2 x lengths 7/0.2mm insulted wire (to suit connection distance)
1 x length heat shrink (to suit connection distance)
1 x small cable tie

nb. plastic sheet was recycled from computer monitor diffusers

Note: 1Amp in line fuse on live side. Use dpdt if switched.

~§~

knoba - tool throat LED

~§~

knoba – Tool throat LED – 2018.dxf

Ebay – Smart IC Driver 20W LED COB 220V

•••

Advertisements