Acquired a bare 3in1 metalwork machine (bends, cuts, rolls).
~§~
Machine needed a sturdy base.
~§~
Detail in the CAD file below
~§~
Chassis finished.
~§~
Made a shelf to catch cut sheet from perforated aluminium.
~§~
Shelf being trialled.
~§~
~§~
Machine on base.
~§~
I make tool socks for my equipment.
~§~
Elastic stitch, eyelet, nylon cord and plastic holder thing.
~§~
Keeps tooling with the machine for adjustment / maintenance.
~§~
I also make covers for my equipment. Poly cotton.
~§~
Detail in the CAD file below
~§~
Identical scales on both slip roll adjusters. Machined from ally.
~§~
Stamped & levelled thread bottoms so both top settings match.
~§~
Added a fence carrier to keep it with the machine.
~§~
Ready for work, or storage.
~§~
Materials: 1.5m x 50mm x 6mm f/s 6.0m x 50mm x 3mm shs 1m x 2mm x 12mm i/d chs 4 x castors 4 x M10 Bolts x 50mm 12 x M12 Bolts x 70mm 4 x M10 Washers 12 x M12 Washers 4 x M10 Square Weldnuts 12 x M12 Hex Weldnuts 8 x 50mm x 50mm Black Square Plastic End Caps Paint, Direct to metal, light blue Polycotton 2m x 1.1m Polyester Thread 2.5m Ball chain
~§~</p
Clarke – SBR760 3 in 1 Sheet Metal Machine
knoba – 3in1 metal working machine stand – 2017.dxf
knoba – 3in1 metal working machine cover – 2017.dxf
•••