Recycled from a well-worn & much favoured Stanley philips 201 screwdriver. Re-ground & oil stone honed with 4 sided point
~§~
Awesome as a point awl (marking accurate; screw / drill points with brad point bits, flat bits & forstners)
~§~
•••
Recycled from a well-worn & much favoured Stanley philips 201 screwdriver. Re-ground & oil stone honed with 4 sided point
~§~
Awesome as a point awl (marking accurate; screw / drill points with brad point bits, flat bits & forstners)
~§~
•••
Quick release rings for the tools on my electronics bench
~§~
Made from the sprung stainless steel inserts from old car wiper blades (the rubber bit sometimes has these in it, ask at your local garage) & some 2.4mm stainless wire for the jump rings.
~§~
Shaped with jewellery pliers
~§~
Better than keyring style rings, these quickly lock into, and out of, place
~§~
Materials:
1 x auto wiper blade insert (normally 2 in each rubber blade)
1 x 40x2.4 mm o/d stainless steel wire
•••
Jig & threaded blank
~§~
Freshly machined thumb wheel blank
~§~
~§~
Screw blank on underside of jig, locknut it, drill through one hole, use lock pin (silver coloured part), drill through other holes, deburr, fettle & smooth thumb wheel.
~§~
Nice!
~§~
~§~
What’s in the CAD file…
~§~
Materials: 1 x 60x60x16 mild steel plate 1 x M12x80mm bzp bolt 1 x M6x40mm 12.9ht Socket cap bolt 1 x m6 washer 1 x m6 nut 1 x 13mmx32mm o/d, m6 threaded, 6 series Aluminium blank
~§~
knoba – thumb wheel jig – 2018.dxf
•••
Almost any steel will do. 7mm o/d, 2 straight flutes, 1/4″ increment depth marks
~§~
Used in lathe, with new handles. Enlarge to fit individuals tangs…
~§~
4° included taper (as per machine taper)
~§~
Can easily remove shank for re-tempering. Link to CAD file below
~§~
knoba – Tool Tang Drill Bit – 2017.dxf
•••
Made from medium carbon steel, brass & spalted cherry.
~§~
~§~
•••
Made from fencing panels (bent by kerf cutting laterals).
~§~
Supported by an external welded steel framework (30mm x 8mm x 30 meters).
~§~
3m wide x 3m high (3.6m from bottom of steps).
Now home to a sweet flowering Jasmine.
~§~
Parker Steel – 30 X 8mm Mild Steel Flat
•••
4″ x 4″ x 2″ softwood. Non-marking, large surface area with 1/8″ edge over-round.
~§~
Waxed for an easy glueing release agent.
Better to be made before one needs them!
~§~
Colron – Refined Finishing Wax
Freud – 1/8″ Radius rounding over bit
•••
DJ Desk for Hotel
~§~
~§~
1st mock-up for clients brief “DJ desk” done in Blender.
~§~
•••
Polished 304 Stainless steel & oak flatscreen TV Stand
~§~
~§~
~§~
~§~
~§~
~§~
~§~
~§~
~§~
~§~
~§~
Colron – Refined Finishing Wax
Parker steel – Stainless Steel Metric Rounds
Metalgeek.com – Tube Coping Calculator
•••