Optical centre punch

View of the CAD file & assembled materials (brass, medium carbon steel & acrylic)…
knoba - optical centre punch

~§~

All machined to stated dimensions.
knoba - optical centre punch

~§~

Loupes’ internal bore has been reamed.
knoba - optical centre punch

~§~

Polished rings at ends and grained through body for finish & finger grip.
knoba - optical centre punch

~§~

Recess for rubber ‘o-ring’ to stop the loupe slipping out of position.
knoba - optical centre punch

~§~

Centre punch is being soaked (the punch is at the front & the bits at the back are for another project).
knoba - optical centre punch

~§~

Punch is going to be quenched in old engine oil.
knoba - optical centre punch

~§~

View through loupes’ optic.
knoba - optical centre punch

~§~

CAD drawing below is for another project and the reason I wanted to make this tool.
knoba - optical centre punch

~§~

O-ring fitted and held in place with epoxy glue.
knoba - optical centre punch

~§~

Tool needs a case to protect the optic and keep the tool together.
knoba - optical centre punch

~§~

Looking forward to using it for the next project…
knoba - optical centre punch

~§~

knoba - optical centre punch

~§~

Cross-hairs were scored on the lathe and highlighted with a blue sharpie pen.
knoba - optical centre punch

~§~

knoba - optical centre punch

~§~

knoba – Optical Centre Punch – 2015.dxf (link below)
knoba - optical centre punch

~§~

knoba – Optical Centre Punch – 2015.dxf (updated)

With thanks to “PJ’s” at PJ’s – Home

•••

Advertisements

Leather Burnisher

In Iroko & brass, with polished waxed finish…
knoba - leather burnisher

~§~

Colron – Refined Finishing Wax

The wood database – Iroko

•••

Solder Fume Extractor Mk2

Solder Fume Extractor Mk2

~§~

Solder Fume Extractor Mk2

~§~

Solder Fume Extractor Mk2

~§~

Solder Fume Extractor Mk2

~§~

Solder Fume Extractor Mk2

~§~

Solder Fume Extractor Mk2

~§~

Solder Fume Extractor Mk2

~§~

Solder Fume Extractor Mk2

~§~

Solder Fume Extractor Mk2

~§~

Alcotec – Aluminum Filler Alloy Selection Chart.pdf

•••

Spoon & Dolly from 5160 steel.

Spoon & Dolly from 5160 steel
Spoon & Dolly from 5160 steel

•••